Orange PLA+ 1.75mm 3D Printing Filament 1kg-Black

Orange PLA+ 1.75mm 3D Printing Filament is an upgrade to normal PLA. It is suitable for all 3D printers and can replace PLA completely. PLA + is several times tougher than the normal PLA on the market; it also produces Smoother finished printouts with no cracking or brittle problem. Spooless filament reduces waste and helps the environment. PLA+ print temperature is about 20 Celsius higher than regular PLA. Most user prints at around 210 to 215 Celsius.

PLA+ Advantages:

• Superb layer bonding
• High rigidity. Good glossiness.
• Several times tougher than PLA
• Smoother finished printouts.
• No cracking or brittle problem.
• Prints are hard to break.

Major differences between PLA+ and regular PLA:

• Elongation At Break: PLA+ 29% | Regular PLA 5% and therefore with PLA+ there is no wiredrawing problems, the surface of the printouts will be smoother and more delicate;
• Izod Impact Strength: PLA+ 7KJ/m2 | Regular PLA 4.2KJ/m2, Hence you can see the Toughness of PLA+ is twice superior than that of regular PLA.
• On top of existing PLA performance, greatly improved the materials’ Fracture Toughness. Print much smoother. No warp or layer breaking problems. No brittle issue.

Features:

• Spool Diameter: 21.5 cm
• Spool Width: 5.5 cm
• Reduced risk of cracks in the 3D print
• Smoother surface finish, at a higher precision
• Hardness improved 10 times over normal PLA
• Stiffer, more glossy, and better colored.