OpenMV Cam M7 Smart Vision Camera

Open MV Cam M7 Smart Vision Camera is a small, low power, microcontroller board that allows you to easily implement applications using machine vision in the real world. You program the Open MV Cam in high-level Python scripts (courtesy of the Micro Python Operating System) instead of C/C++.

This makes it easier to deal with the complex outputs of machine vision algorithms and working with high-level data structures. But, you still have total control over your Open MV Cam and it’s I/O pins in Python. You can easily trigger taking pictures and videos on external events or execute machine vision algorithms to figure out how to control your I/O pins. MicroSD card socket capable of 100Mbs read or write. SPI bus runs up to 54Mbs allowing easy stream image data Open MV camera comes with a 2.8mm lens on a standard M12 lens mount.

The Open MV Cam Features:
The STM32F765VI ARM Cortex M7 processor running at 216 MHz with 512KB of RAM and 2 MB of flash. All I/O pins output 3.3V and are 5V tolerant. The processor has the following I/O interfaces:

A full-speed USB (12Mbs) interface to your computer. Your Open MV Cam will appear as a Virtual COM Port and a USB Flash Drive when plugged in.
A μSD Card socket capable of 100Mbs reads/writes which allows your Open MV Cam to record video and easy pull machine vision assets off of the μSD card.
An SPI bus can run up to 54Mbs allowing you to easily stream image data of the system to either the LCD Shield, the WiFi Shield, or another microcontroller.
An I2C Bus, CAN Bus, and an Asynchronous Serial Bus (TX/RX) for interfacing with other microcontrollers and sensors.
A 12-bit ADC and a 12-bit DAC.
Three I/O pins for servo control.
Interrupts and PWM on all I/O pins (there are 10 I/O pins on the board).
And, an RGB LED and two high power 850nm IR LEDs.
The OV7725 image sensor is capable of taking 640×480 8-bit grayscale images or 640×480 16-bit RGB565 images at 60 FPS when the resolution is above 320×240 and 120 FPS when it is below. Most simple algorithms will run at above 30 FPS. Your Open MV Cam comes with a 2.8mm lens on a standard M12 lens mount. If you want to use more specialized lenses with your Open MV Cam you can easily buy and attach them yourself.

To download Open MV Cam M7 firmware files, click here.