Waveshare 1.54 inch e-Ink Paper Display Module with SPI Interface

Waveshare 1.54 inch e-Ink Paper Display Module with SPI Interface comes with 200×200 resolution and embedded controller module. It is communicating via SPI interface and it supports partial refresh. As these displays have no backlight panels and it doesn’t need a continuous power supply to display the (static data with periodic intervals) data on the screen, it has a great advantage of ultra-low power consumption. Also, it has a wide viewing angle, great viewing effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features:
No backlight so keeps displaying last content for a long time even when the power is down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Wide viewing angle, great viewing effect under sunlight.
Interface:
SYMBOL DESCRIPTION
VCC 3.3V/5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, high active
Useful Links:
Development Resources: Wiki link: www.waveshare.com/wiki/1.54inch_e-Paper_Module

Tutorial: Make a new larger font for Waveshare SPI e-Paper

Package Includes:
1 x Waveshare 1.54 inch e-Ink Paper Display Module with SPI Interface (Res: 200 x 200)

1 x Interfacing Cable